top of page

Crazymetal stainless steel honeycomb panel related introduction

Crazymetal stainless steel honeycomb panel uses better panel materials and has a high level of flatness. The back of the stainless steel plate does not require reinforcing ribs, and its strength and rigidity can also meet the required requirements. Stainless steel honeycomb panels are based on different buildings, regions, curtain walls, and wind pressure. Carry out design calculations, and then select the thickness of the stainless steel plate and the thickness of the honeycomb according to the design requirements, and manufacture different types of large and small blocks according to the design requirements, and can meet the following main indicators: wind pressure indicators, air tightness indicators, water tightness Performance indicators, impact resistance indicators, plane deformation, heat preservation, sound insulation and other indicators. The surface of stainless steel plate is generally vacuum electroplated. The thickness of the coating is too thin, 0.04-0.1um, and the reflectivity is low; too thick, poor adhesion, and easy to fall off.

Honeycomb panel

The position of the sealing hole is also very important for the stainless steel honeycomb panel. Otherwise, rainwater will flow into the honeycomb core when it is installed on the wall, which will damage the core and cause water leakage. Therefore, the outer curtain wall of the stainless steel honeycomb panel is stainless steel veneer The thickness of the honeycomb should be wider than the stainless steel veneer of the inner curtain wall, and the sides should be bent 90 degrees inward to cover the honeycomb glued or welded, and no water leakage is allowed.

Honeycomb panel

We remind you that the lightning protection problem of stainless steel honeycomb panels should also be paid attention to, and we should not be sloppy. We know that the structure of stainless steel honeycomb panels is sandwiched by two stainless steel plates with a thickness of 0.5mm~3.0mm and 0.5mm~3.0mm. It is made of a honeycomb-shaped middle core layer made of different materials.

5 views1 comment

1 Comment

ricky wilson
ricky wilson
Aug 07, 2020

A new generation of environmentally friendly building materials, standard, easy to install

bottom of page