Materials Technology ｜ What is 3M film? .html.txt111222333aaabbbaaac. Gypsum and calcium-silicon boa

2. The construction process of 3M film The construction process is: measuring size and cutting→determining the position→pasting operation→detail processing→completion. a. Size measurement and cutting: After measuring the sticking area correctly, reserve 4~5cm of the sticking film area before cutting, and the cutting must be done on a smooth substrate; b. Determine the position: After determining the pasting position, it cannot be moved, especially when the pasting area is particularly large, and then place the 3M film on the pasted substrate;

c. Pasting operation: start from bottom to top along the top of the folded back release paper, pressurize it with a scraper to make it join, when pressing, it must start from the central part, and then flatten to both sides; d. Details processing: If large air bubbles are generated during the film sticking process, the part must be torn off and re-pasted, and bonded with a scraper under pressure; for small air bubbles, use pushpins to pierce the side peaks of the air bubbles, and then use a scraper Squeeze out the air bubbles on the board and just scrape it flat.Using "stainless steel honeycomb panel" as the base material, Crazy Metal has developed "stainless steel shaped walls, stainless steel hanging column, stainless steel partition chandeliers, and stainless steel DIY cabinets" suitable for high-end projects.