The center of the stainless steel honeycomb panel is an aluminum hexagonal honeycomb with a low density (about 3-7 kg per square meter), which is 1/5 of the weight of the same thickness and the same area of the wood, 1/6 of the glass, and 1/7 of the aluminum. , Which greatly reduces the building load and cost. Because the middle layer contains a lot of air, it can be soundproof (the sound insulation of air can reach 30dB), heat insulation (thermal resistance can reach 0.02 (㎡·K/W)), no combustible materials, and aluminum ceiling fireproof The grade reaches B1, waterproof, moisture-proof, and no harmful gas is released. Now, let us understand together: five commonly used installation methods for stainless steel honeycomb panels.
Five commonly used installation methods for Crazymetal stainless steel honeycomb panels
1. Ear type
The lifting lugs are separated from the honeycomb panel. After the lifting lugs are processed separately, they are connected to the glue seam position of the honeycomb panel. The suitable width of the glue seam is ≥12mm. This installation method makes the processing simple and the installation convenient.
2. Flanging
It is a flanging for installation when processing stainless steel honeycomb panels. It only needs to be installed at the place where the joints are connected to the keel and the glue seam. The suitable glue seam width is ≥ 10mm. This method is convenient to install, but the processing is a little more complicated. Modeling curtain wall panels.
3. Hook-on hoisting
It is mainly used in suspended ceilings with no edge height difference and no special shapes, and the overall suspended ceiling is stable after installation. This method is not recommended for honeycomb panels with large spokes and thin panels.
4. Z-shaped pendant hoisting
It is widely used, easy to process and easy to install. It can be repaired by more than one person after hoisting. It is suitable for ceiling installation of any shape.
5. U-shaped pendant type
Use the method of hanging directly to the keel from below, and then fixing it to the keel in a place within reach. This hoisting method solves the problem of ordinary Z-shaped pendant type, which has wide plate spokes and low keel, which cannot be installed by people.